• TAPPI T 536 om-12
Provide PDF Format

Learn More

TAPPI T 536 om-12

  • Resistance of paper to passage of air (high-pressure Gurley method)
  • standard by Technical Association of the Pulp and Paper Industry, 05/01/2012
  • Publisher: TAPPI

$25.00$49.00


1.1 This method is used to measure the air resistance of approximately 6.4 sq. cm. (1 sq. in.) circular area ofpaper using a pressure differential of approximately 3 kPa. The recommended range of this instrument is for papers that require 10 or more seconds for 10 mL of air to pass through. Refer to the manufacturer's instructions for the upper range limits. For more permeable papers, other techniques are preferable. Instruments are available with automatic timing devices.

1.2 This method measures the time it takes for a given volume of air to pass through the test specimen, alongwith any possible leakage of air across the surface; therefore it is unsuitable for rough-surface papers which cannot be securely clamped so as to avoid significant surface and edge leakage.

1.3 For a similar method of measuring air resistance that tests paper at a lower pressure (approx. 1.22 kPa),and has higher volume capabilities, refer to TAPPI T 460 ?Air Resistance of Paper.? For a similar method of measuring air permeance at pressures up to 9.85 kPa, using both smaller and larger test areas, refer to TAPPI T 547 ?Air Permeance of Paper and Paperboard (Sheffield Type).?

Related Products

TAPPI T1014

TAPPI T1014

Moisture Sensitivity of Fiberglass Mats..

$65.00 $130.00

TAPPI T 536 om-12

TAPPI T 536 om-12

Resistance of paper to passage of air (high-pressure Gurley method)..

$25.00 $49.00

TAPPI TIP0305-28

TAPPI TIP0305-28

Setup and Run Checklist..

$25.00 $49.00

TAPPI TIP 0305-46

TAPPI TIP 0305-46

Stacking Off the Rotary Diecutter..

$25.00 $49.00