Provide PDF Format
TAPPI T 200 sp-15
- Laboratory Beating of Pulp (Valley Beater Method)
- standard by Technical Association of the Pulp and Paper Industry, 04/21/2015
- Publisher: TAPPI
$25.00$49.00
This procedure is used to define the papermaking quality of pulp, by subjecting it to a controlled mechanical treatment in a laboratory beater; see also TAPPI T248 "Laboratory Beating of Pulp (PFI Mill Method)."
The beating procedure may be used with any pulp, suitably modifying the withdrawal schedule to provide the number of samples required for a satisfactory beater curve. The method may not give satisfactory results with certain extremely long-fibered pulps, such as cotton fibers or jute since the fibers entangle and tend to rope in the beater.
The beating procedure may be used with any pulp, suitably modifying the withdrawal schedule to provide the number of samples required for a satisfactory beater curve. The method may not give satisfactory results with certain extremely long-fibered pulps, such as cotton fibers or jute since the fibers entangle and tend to rope in the beater.
Related Products
TAPPI T464
Water Vapor Transmission Rate of Paper and Paperboard at High Temperature and Humidity..
$47.00 $93.00
TAPPI TIP 0402-03
Guidelines for Corrosion Resistant Weld Metal Overlay of Digester Vessels in Alkaline Pulping Servic..
$25.00 $49.00