SAE J207_201205
- Electroplating of Nickel and Chromium on Metal Parts - Automotive Ornamentation and Hardware (Stabilized: May 2012)
- standard by SAE International, 05/11/2012
- Publisher: SAE
$37.00$74.00
Four grades of coatings are provided to correlate with the service conditions under which each is expected to provide satisfactory performance, namely: very severe, severe, moderate, and mild. Definitions and typical examples of these service conditions are provided in Appendix A. Information contained in this document generally conforms to the information contained in ASTM B 46, Specification for Electrodeposited coatings of Nickel plus Chromium.
Related Products
SAE AS7211A
Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100 Procurement Specification..
$37.00 $74.00
SAE J1199_201302
Mechanical and Material Requirements for Metric Externally Threaded Steel Fasteners (Stabilized: Feb..
$37.00 $74.00
SAE AMS6308D
Steel, Bars and Forgings 0.90Si 1.0Cr 2.0Ni 3.2Mo 2.0Cu 0.10V (0.07-0.13C) Vacuum Arc or Electroslag..
$37.00 $74.00
SAE AMS3361C
Silicone Potting Compound, Elastomeric Two-Part, General Purpose 150 to 400 Poise (15 to 40 Pa·s) V..
$37.00 $74.00