Provide PDF Format
SAE J1638_201504
- Compression Set of Hoses or Solid Discs (Stabilized: Apr 2015)
- standard by SAE International, 04/21/2015
- Publisher: SAE
$37.00$74.00
This SAE Recommended Practice is used for establishing the compression set that could be expected to occur with engine coolant hoses under securing clamps. It seeks to reproduce the type of indentation caused by the clamps in the wall of the hose. An excessive compression set measured by this method would indicate a hose that could eventually alloy leakage of coolant past the clamps in service. This method has been found to give repeatable results in the range of 25% to 50% initial compression.
Related Products
SAE AS126275B
Stud - Straight, Cadmium Plated, Steel, UNS G87400, 125 ksi min, .3125 - 18 NS X .3125 - 24 UNF-3A..
$37.00 $74.00
SAE AMS4600
Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution Heat Treated, Cold..
$37.00 $74.00
SAE J2076_201207
High-Temperature Power Steering Return Hose - Low Pressure (Stabilized: Jul 2012)..
$37.00 $74.00