Provide PDF Format
SAE J 829
- Fuel Tank Filler Cap and Cap Retainer
- standard by SAE International, 08/04/2005
- Publisher: SAE
$37.00$74.00
This SAE Standard was developed primarily for passenger car and truck applications for the sizes indicated, but it may be used in marine, industrial, and similar applications.The purpose of this document is to provide dimensions for vented, nonvented, and pressure-vacuum fuel tank filler caps and cap retainers. Use of these dimensions will preclude the use of a vented or nonvented cap with a pressure-vacuum cap retainer. In addition, these dimensions insure that if use of a pressure-vacuum cap is attempted with a vented cap retainer, it will not seal. They will, however, allow the use of a pressure-vacuum cap on a nonvented cap retainer.
Related Products
SAE AMS3798/13B
Webbing, Low Modulus Aramid, 1-23/32 (44) Wide, 7,300 (32,472), Breaking Strength, Twill, Resin Trea..
$37.00 $74.00
SAE AS39029/29B
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR AS50151 SERIES, AS34501 AND MIL-DTL-83723 ..
$37.00 $74.00
SAE AMS4464
Aluminum Alloy Plate (2624-T351) 4.1Cu - 1.4Mg - 0.6Mn Solution Heat Treated, Cold Worked and Natura..
$37.00 $74.00