Provide PDF Format
SAE AMS4194C
- Aluminum Alloy, Sheet and Plate, Alclad, 4.4Cu 1.5Mg 0.60Mn, Solution Heat Treated and Cold Worked ( Reaffirmed: Apr 1994 Mar 2012 )
- standard by SAE International, 04/01/1989
- Publisher: SAE
$37.00$74.00
This specification has been declared NONCURRENT by the Aerospace Materials Division, SAE, as of February, 2005. It is recommended, therefore, that this specification not be specified for new designs. NONCURRENT refers to those specifications which have previously been widely used and which may be required on some existing designs in the future. The Aerospace Materials Division, however, does not recommend these specifications for future use in new designs.This specification covers an aluminum alloy in the form of flat sheet and plate 0.500 inch (12.70 mm) and under in nominal thickness. Primarily for structural parts requiring a combination of good strength and maximum corrosion resistance. These products, when re-solution heat treated by the user, may not have the tensile properties shown. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP 823 recommends practices to minimize such conditions.
Related Products
SAE AS81824/6
SPLICE, ELECTRIC, PERMANENT, CRIMP, NICKEL PLATED INSULATED WIRES, ENVIRONMENTAL CLASS 1, 175 °C..
$37.00 $74.00
SAE AS39029/103A
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, COAXIAL, SIZE 12 (FOR MIL-DTL-38999 SERIES I, ..
$37.00 $74.00
SAE AS85049/85B
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/E..
$37.00 $74.00