Provide PDF Format
SAE AMS3678C
- Polytetrafluoroethylene (PTFE) Moldings and Extrusions, Unfilled, Pigmented, and Filled
- standard by SAE International, 11/30/2010
- Publisher: SAE
$37.00$74.00
This specification covers several grades of virgin polytetrafluoroethylene (PTFE) resin which may be compounded with pigment and fillers in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.These products have been used typically for mechanical parts such as back-up rings, seals, and bearings requiring dimensional stability up to 450 \mDF (232 \mDC) with good mechanical properties, but usage is not limited to such applications. Each application should be considered individually.
Related Products
SAE J1502_201305
Connections for Fluid Power and General Use - Hydraulic Couplings - Diagnostic..
$37.00 $74.00
SAE J1131_199808
Performance Requirements for SAE J844 Nonmetallic Tubing and Fitting Assemblies Used in Automotive A..
$37.00 $74.00
SAE J1213/1_199709
Glossary of Vehicle Networks for Multiplexing and Data Communications..
$37.00 $74.00