Provide PDF Format
CAN/ULC S102.2-07
- Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings, and Miscellaneous Materials and Assemblies
- standard by Underwriters Laboratories of Canada, 08/01/2007
- Publisher: CAN/ULC
$28.00$56.00
This Standard is applicable to the finished surface or covering of a floor extending to a maximum depth of 65 mm. This method is also applicable to the following: A Materials which cannot be tested as described in Clause 1.1 of CAN/ULC-S102 without the use of supporting material that is not representative of the intended installation; B Materials which, when tested in the manner described in Clause 1.1 of CAN/ULC-S102, melt and drip, or otherwise disintegrate and continue to burn on the floor of the test chamber; C Materials that are designed for use in a relatively horizontal position with only its top surface exposed to air; or D Thermoplastic materials.
Related Products
CAN/ULC S705.1-01
Standard for Thermal Insulation - Spray Applied Rigid Polyurethane Foam, Medium Density - Material -..
$41.00 $81.00
ULC 711.2
Standard for Thermal Insulation - Bead-Applied Two Component Polyurethane Air Sealant Foam - Part 2:..
$126.00 $251.49
CAN/ULC S133-M90(R1997)
Standard for Door Closers Intended for Use with Swinging Doors..
$62.00 $123.26