• AWWA WQTC71464
Provide PDF Format

Learn More

AWWA WQTC71464

  • New USEPA Methods Using 2-D IC for Bromate (302.0) and Perchlorate (314.2) Determination for Enhanced Selectivity and Sensitivity
  • Conference Proceeding by American Water Works Association, 11/01/2009
  • Publisher: AWWA

$12.00$24.00


Bromate is commonly formed from the ozonation of bromide in drinking waterand is determined to be a human carcinogen. Currently, bromate is regulatedin drinking water at 10 ug/L. U.S. Environmental Protection Agency (USEPA) Methods 300.1 B, 317.0, and 326.0 areapproved by the USEPA for compliance monitoring. High concentrations ofcommon anions, such as chloride, sulfate, and carbonate, can produce poorbromate peak shapes and lower recoveries. This often requires the analyst toeither dilute the sample which raises the minimum reporting limit (MRL) or pretreatthe sample offline prior to analysis. Pretreatment of samples requiresincreased time and cost for each analysis. Therefore, the objective of this projectwas to develop a method that eliminates high concentrations of matrix ions andminimizes interferences. This paper describes two new USEPA pending methodsusing two-dimensional (2D) ion chromatographic (IC). In the first dimension, alarge loop is injected on a 4-mm high capacity ion exchange column to separatebromate from matrix anions. Bromate is selectively removed using automatedvalve switching onto a concentrator column. In the second dimension, Bromateis separated a second time using a 2-mm anion exchange column followed byquantitation after suppressed conductivity detection. This strategy allows theability to inject large sample volumes, focus bromate partially resolved in the firstdimension onto a concentrator column and separate it on a second, higherresolution column. It also combines two different column chemistries to enhanceselectivity and reduce the possibility of false positives and eliminates the need forsecond column confirmation. This method also improves upon USEPA Method314.0 and 314.1 for the determination of perchlorate in drinking water, even inthe presence of high salt matrices (>1,000 mg/L for Cl<sup>-</sup>, SO<sub>4</sub> and NO<sub>3</sub>). The newmethod results in a 4-fold signal enhancement, which yields a lower detectionlimit (0.016 µg/L). Includes abstract only.

Related Products

AWWA MTC57558

AWWA MTC57558

Detection of Organic and Biological Foulants on Polyamide Membranes During Surface Water Treatment..

$12.00 $24.00

AWWA WQTC50378

AWWA WQTC50378

Sediments Characterization and Water Quality Variation in Storage Tanks..

$12.00 $24.00

AWWA C561-04

AWWA C561-04

Fabricated Stainless Steel Slide Gates..

$36.00 $72.00

AWWA IMTECH59641

AWWA IMTECH59641

Network Security and Connectivity: How to Get More of Both without Getting Less of Either..

$12.00 $24.00