• AWWA WQTC62577
Provide PDF Format

Learn More

AWWA WQTC62577

  • Analyzing UV Reactor Validation Data to Verify UV Dose Delivery Using the UV Disinfection Guidance Manual
  • Conference Proceeding by American Water Works Association, 11/01/2005
  • Publisher: AWWA

$12.00$24.00


To obtain Cryptosporidium and Giardia log inactivation credit using ultraviolet (UV) disinfection, the Long Term 2 Enhanced Surface Water Treatment Rule (LT2ESWTR) will require that UV disinfectionsystems undergo validation testing. During validation, the dose delivery of a UV system is evaluated as a function of flowrate through the UV reactor, UVT of the water, and lamp power,using a test microbe. Validation is conducted in order to develop performance relationships forUV reactors as well as to develop dose monitoring strategies for on-line compliance monitoring ofUV reactors. In anticipation of the LT2ESWTR, the US Environmental Protection Agency (USEPA) is developing the UV DisinfectionGuidance Manual (UVDGM) to provide technical information on the application of ultravioletlight for the disinfection of drinking water by public water systems. The UVDGM providesguidance on recommended procedures for validating a UV reactor and data analysis, based on theLT2ESWTR validation requirements.The dose measured during validation using the test microbe is referred to as the Reduction Equivalent Dose (RED). USEPA has developed an approach for calculating a safety factor, known as the Equipment Factor (EF), which is applied to the validation RED data. The EF accounts forbias and random errors associated with validation and dose delivery monitoring. The EF is used to define the RED that is required at water treatment plants (WTP) to achieve the inactivation requirement for the target pathogen.This paper provides a comprehensive review of the UVDGM-prescribed methodology for analyzing UV reactor validation data using the UVDGM June 2003 Draft and January 2005revisions thereof. The analysis incorporates all elements of the Equipment Factor (EF) calculations and using a real world example from a large-scale UV reactor validation conducted at the UVValidation Facility in Portland, Oregon. Includes 3 references, table, figures.

Related Products

AWWA ACE69004

AWWA ACE69004

An Uncovered Finished Water Reservoir and the LT2ESWTR..

$12.00 $24.00

AWWA MTC57603

AWWA MTC57603

Impact of Ultrafiltration Membrane Material and Pre-Coagulation Strategy on an Enhanced Clarificatio..

$12.00 $24.00

AWWA QTC97036

AWWA QTC97036

Sorption and Inactivation of Viruses in Soil Columns Under Saturated and Unsaturated Flow Conditions..

$12.00 $24.00

AWWA ACE61709

AWWA ACE61709

Claremont Corridor Seismic Improvement Project..

$12.00 $24.00