ASTM PS125-01
- Provisional Standard Consumer Safety Performance Specification for Diaper Changing Tables for Commercial Use
- standard by ASTM International, 04/12/2001
- Publisher: ASTM
$20.00$39.00
1. Scope
1.1 This specification covers carbon-manganese steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of buildings and for general structural purposes.
1.2 Material under this specification is available in two grades:
| Grade | Yield Strength,ksi [MPa] | Thickness |
| 50 [345] | 50 [345] | Plates to 1 in. [25 mm] thick to 12 in. [305 mm] wide |
| Bars to 3 1/2 in. [90 mm] | ||
| Shapes-Groups 1&2 | ||
| 55 [380] | 55 [380] | Plates to 1 in. [25 mm] thick to 12 in. [305 mm] wide |
| Bars to 3 in. [75 mm] | ||
| Shapes-Groups 1&2 |
1.3 When the steel is to be welded, it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be utilized. See Appendix X3 of Specification A6/A6M for information on weldability.
1.4 The values stated in either inch-pound units or SI units are to be regarded as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other.
Related Products
ASTM C1178/C1178M-01
Standard Specification for Glass Mat Water-Resistant Gypsum Backing Panel..
$23.00 $46.80
ASTM E527-07
Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)..
$26.00 $52.80
ASTM C846-94(1999)
Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing..
$23.00 $46.80
ASTM C1421-10
Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temper..
$38.00 $76.80