ASTM E592-99(2004)
- Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates 1/4 to 2 in. [6 to 51 mm] Thick with X Rays and 1 to 6 in. [25 to 152 mm] Thick with Cobalt-60
- standard by ASTM International, 07/01/2004
- Publisher: ASTM
$26.00$52.80
1.1 This guide to obtainable equivalent penetrameter sensitivity covers the minimum penetrameter thicknesses for which the image of the 1T and 2T holes is visible for a few practical radiographic conditions. The values represent near optimum sensitivity for flat steel plates. Radiographic conditions that give higher values of scatter buildup from the specimen or backscattered radiation at the image plane will give poorer sensitivity.
1.2 Eight radiographs that illustrate sensitivities obtainable with practical radiographic systems are included as adjuncts to this guide and may be obtained from ASTM.
1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in brackets are for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Related Products
ASTM D3816/D3816M-96(2003)
Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes..
$23.00 $46.80
ASTM D5757-11
Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets..
$20.00 $39.00
ASTM E1462-00
Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules..
$23.00 $46.80