ASTM D4061-94(2000)
- Standard Test Method for Retroreflectance of Horizontal Coatings
- standard by ASTM International, 01/01/2000
- Publisher: ASTM
$26.00$52.80
1.1 This test method describes the instrumental measurement of the retroreflective properties of horizontal surfacing materials, such as traffic stripe paint systems, traffic tapes, and traffic surface symbols.
1.2 Specimen preparation, size, and shape must be determined and specified by the user of this test method. Likewise, the user must specify the observation and entrance angles to be used (see Fig. 1).
1.3 The geometric requirements of this test method are based on materials for which the relative retroreflectance changes less than approximately 50% over the observation angle range from 0.2 to 0.5°. This is illustrated in Fig. 2.
1.4 This test method is a laboratory test and requires a facility that can be darkened sufficiently so that stray light does not affect the test results. This facility must be capable of housing the required 15-m test distance.
1.5 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Related Products
ASTM D4502-92(1998)e1
Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints..
$30.00 $60.00
ASTM D2829-07
Standard Practice for Sampling and Analysis of Existing Built-Up Roof Systems..
$26.00 $52.80
ASTM D4454-85(2009)
Standard Test Method for Simultaneous Enumeration of Total and Respiring Bacteria in Aquatic Systems..
$23.00 $46.80
ASTM F1901-10
Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems..
$26.00 $52.80