ASTM A995/A995M-09
- Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
- standard by ASTM International, 05/01/2009
- Publisher: ASTM
$23.00$46.80
1.1 This specification covers austenitic-ferritic (duplex) stainless steel castings for valves, flanges, fittings, and other pressure-containing parts.
1.2 The duplex stainless steels offer a combination of enhanced mechanical properties and corrosion resistance when properly balanced in composition and properly heat treated. Ferrite levels are not specified, but these grades will develop a range of approximately 30 to 60 % ferrite with the balance austenite. It is the responsibility of the purchaser to determine which grade shall be furnished depending on design and service conditions, mechanical properties, and corrosion-resistant characteristics.
Note 1 - Because of the possibility of precipitation of embrittling phases, the grades included in this specification are not recommended for service at temperatures above 600°F [315°C].
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
Related Products
ASTM D6951/D6951M-09
Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications..
$26.00 $52.80
ASTM A388/A388M-95(2000)
Standard Practice for Ultrasonic Examination of Heavy Steel Forgings..
$26.00 $52.80
ASTM C1170-91(1998)e1
Standard Test Methods for Determining Consistency and Density of Roller-Compacted Concrete Using a V..
$26.00 $52.80