ASTM A529/A529M-05(2009)
- Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
- standard by ASTM International, 10/01/2009
- Publisher: ASTM
$23.00$46.80
1.1 This specification covers carbon-manganese steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of buildings and for general structural purposes.
1.2 Material under this specification is available in two grades:
| Grade | Yield Strength, ksi [MPa] | Thickness |
| 50 [345] | 50 [345] | Plates to 1 in. [25 mm] thick to 15 in. [380 mm] wide |
| Bars to 3½ in. [90 mm] | ||
| Shapes with flange or leg thickness to 1½ in. [40 mm] inclusive | ||
| 55 [380] | 55 [380] | Plates to 1 in. [25 mm] thick to 15 in. [380 mm] wide |
| Bars to 3 in. [75 mm] | ||
| Shapes with flange or leg thickness to 1½ in. [40 mm] inclusive |
1.3 When the steel is to be welded, it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be utilized. See Appendix X3 of Specification A6/A6M for information on weldability.
1.4 The values stated in either inch-pound units or SI units are to be regarded as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other.
Related Products
ASTM F2384-10
Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS..
$23.00 $46.80
ASTM D4912/D4912M-14
Standard Test Method for Fabric Stability of Vinyl-Coated Glass Yarn Insect Screening and Louver Clo..
$20.00 $39.00
ASTM C490/C490M-08
Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Pas..
$26.00 $52.80
ASTM F509-86(2000)e1
Standard Practice for Testing One-Time Carbonizing Tissue for Pinholes..
$23.00 $46.80