ASTM A312/A312M-14
- Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
- standard by ASTM International, 03/01/2014
- Publisher: ASTM
$30.00$60.00
1.1 This specification2 covers seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service.
Note 1-When the impact test criterion for a low-temperature service would be 15 ft·lbf [20 J] energy absorption or 15 mils [0.38 mm] lateral expansion, some of the austenitic stainless steel grades covered by this specification are accepted by certain pressure vessel or piping codes without the necessity of making the actual test. For example, Grades TP304, TP304L, and TP347 are accepted by the ASME Pressure Vessel Code, Section VIII Division 1, and by the Chemical Plant and Refinery Piping Code, ANSI B31.3, for service at temperatures as low as −425 °F [−250 °C] without qualification by impact tests. Other AISI stainless steel grades are usually accepted for service temperatures as low as −325 °F [−200 °C] without impact testing. Impact testing may, under certain circumstances, be required. For example, materials with chromium or nickel content outside the AISI ranges, and for material with carbon content exceeding 0.10 %, are required to be impact tested under the rules of ASME Section VIII Division 1 when service temperatures are lower than −50 °F [−45 °C].Related Products
ASTM E1158-98
Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudina..
$23.00 $46.80
ASTM D4603-96
Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Gla..
$23.00 $46.80
ASTM E935-00e1
Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings..
$26.00 $52.80
ASTM D4042-93(2009)
Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oil..
$23.00 $46.80