ASTM A302/A302M-03
- Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
- standard by ASTM International, 09/10/2003
- Publisher: ASTM
$23.00$46.80
1.1 This specification covers manganese-molybdenum and manganese-molybdenum-nickel alloy steel plates intended particularly for welded boilers and other pressure vessels.
1.2 Plates under this specification are available in four grades having different strength levels as follows:
Grade | Tensile Strength, ksi [MPa] | Type |
A | 75-95 [515-655] | Mn-Mo |
B | 80-100 [550-690] | Mn-Mo |
C | 80-100 [550-690] | Mn-Mo-Ni |
D | 80-100 [550-690] | Mn-Mo-Ni |
1.3 The maximum thickness of plates is limited only by the capacity of the chemical composition to meet the specified mechanical property requirements. The minimum thickness is limited to 0.25 in. [6.5 mm].
1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.
Related Products
ASTM G113-06e1
Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials..
$26.00 $52.80
ASTM F563-00
Standard Specification for Wrought Cobalt-20Nickel-20Chromium-3.5Molybdenum-3.5Tungsten-5Iron Alloy ..
$23.00 $46.80
ASTM B857-11e2
Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coate..
$26.00 $52.80