ASTM A1010/A1010M-01e1
- Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip
- standard by ASTM International, 03/10/2001
- Publisher: ASTM
$23.00$46.80
1.1 This specification covers martensitic stainless steels for various structural, architectural, pressure vessel, and heat-resisting applications. The mechanical properties of these steels are customarily, but not necessarily, developed by a suitable heat treatment generally referred to as tempering.
1.2 Steel products under this specification are available in two grades:
| Grade | Yield Strength, min, ksi (MPa) |
| 40 (275) | 40 (275) |
| 50 (350) | 50 (350) |
1.3 The maximum thickness of plates is limited only by the capacity of the composition to meet the specified mechanical property requirements; however, current practice normally limits the maximum thickness of plates furnished under this specification to 1 in. (25 mm).
1.4 The values stated in inch-pound or SI units are to be regarded separately as the standard. Within the text, SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the "M" designation of this specification is specified in the purchase order.
Related Products
ASTM D16-14
Standard Terminology for Paint, Related Coatings, Materials, and Applications..
$26.00 $52.80
ASTM A991/A991M-10(2015)
Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat ..
$20.00 $39.00
ASTM D3609-00(2014)
Standard Practice for Calibration Techniques Using Permeation Tubes..
$22.00 $44.00
ASTM D5791-95(2001)
Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings..
$26.00 $52.80