Provide PDF Format
AASHTO T 324-16
- Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt (HMA)
- standard by American Association of State and Highway Transportation Officials, 2016
- Publisher: AASHTO
$30.00$60.00
This test method describes a procedure for testing the rutting and moisture-susceptibility of hot mix asphalt (HMA) pavement samples in the Hamburg Wheel-Tracking Device.
The method describes the testing of submerged, compacted HMA in a reciprocating rolling-wheel device. This test provides information about the rate of permanent deformation from a moving, concentrated load. A laboratory compactor has been designed to prepare slab specimens. Also, the Superpave© Gyratory Compactor (SGC) has been designed to compact specimens in the laboratory. Alternatively, field cores of diameter, [150 mm (6 in.), 250 mm (10 in.), or 300 mm (12 in.)], or saw-cut slab specimens may be tested.
The test method is used to determine the premature failure susceptibility of HMA due to weakness in the aggregate structure, inadequate binder stiffness, or moisture damage. This test method measures the rut depth and number of passes to failure.
This test method measures the potential for moisture damage effects because the specimens are submerged in temperature-controlled water during loading.
The method describes the testing of submerged, compacted HMA in a reciprocating rolling-wheel device. This test provides information about the rate of permanent deformation from a moving, concentrated load. A laboratory compactor has been designed to prepare slab specimens. Also, the Superpave© Gyratory Compactor (SGC) has been designed to compact specimens in the laboratory. Alternatively, field cores of diameter, [150 mm (6 in.), 250 mm (10 in.), or 300 mm (12 in.)], or saw-cut slab specimens may be tested.
The test method is used to determine the premature failure susceptibility of HMA due to weakness in the aggregate structure, inadequate binder stiffness, or moisture damage. This test method measures the rut depth and number of passes to failure.
This test method measures the potential for moisture damage effects because the specimens are submerged in temperature-controlled water during loading.
Related Products
AASHTO PP 69-10
Standard Practice for Determining Pavement Deformation Parameters and Cross Slope from Collected Tra..
$25.00 $50.00
AASHTO T 208-10
Standard Method of Test for Unconfined Compressive Strength of Cohesive Soil (ASTM Designation: D 21..
$25.00 $50.00
AASHTO M 304-03
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Wall Drain Pipe and Fittings Based on ..
$20.00 $40.00