Provide PDF Format
AASHTO T 319-08
- Standard Method of Test for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
- standard by American Association of State and Highway Transportation Officials, 08/01/2008
- Publisher: AASHTO
$32.00$63.00
This standard describes a procedure for the extraction and recovery of asphalt binder from asphalt mixtures [both hot-mix asphalt (HMA) and reclaimed asphalt pavement (RAP)] that have a minimal effect on the physical and chemical properties of the asphalt binder recovered. This standard is intended for use when the physical or chemical properties, or both, of the recovered asphalt binder are to be determined. It can also be used to determine the quantity of asphalt binder in the HMA or RAP. Recovered aggregate may be used for sieve analysis.
This method is applicable to HMA sampled from the pavement, RAP sampled from the pavement or stockpile, HMA plant production, or laboratory fabricated HMA.
This method is applicable to HMA sampled from the pavement, RAP sampled from the pavement or stockpile, HMA plant production, or laboratory fabricated HMA.
Related Products
AASHTO T 176-08 (2013)
Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivale..
$34.00 $68.00
AASHTO T 313-10
Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Ben..
$28.00 $55.00
AASHTO PP 73-13 (2015)
Standard Practice for Quality Assurance, Job Site Quality Control, and Reapplication of Protective S..
$34.00 $68.00