Provide PDF Format
AASHTO T 315-12 (R2016)
- Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- standard by American Association of State and Highway Transportation Officials, 2012
- Publisher: AASHTO
$35.00$69.00
This test method covers the determination of the dynamic shear modulus and phase angle of asphalt binder when tested in dynamic (oscillatory) shear using parallel plate test geometry. It is applicable to asphalt binders having dynamic shear modulus values in the range from 100 Pa to 10 MPa. This range in modulus is typically obtained between 6 and 88°C at an angular frequency of 10 rad/s. This test method is intended for determining the linear viscoelastic properties of asphalt binders as required for specification testing and is not intended as a comprehensive procedure for the full characterization of the viscoelastic properties of asphalt binder.
This standard is appropriate for unaged material or material aged in accordance with T 240 and R 28.
Particulate material in the asphalt binder is limited to particles with longest dimensions less than 250 micrometers.
This standard is appropriate for unaged material or material aged in accordance with T 240 and R 28.
Particulate material in the asphalt binder is limited to particles with longest dimensions less than 250 micrometers.
Related Products
AASHTO T 176-08 (2013)
Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivale..
$34.00 $68.00
AASHTO T 313-10
Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Ben..
$28.00 $55.00
AASHTO PP 73-13 (2015)
Standard Practice for Quality Assurance, Job Site Quality Control, and Reapplication of Protective S..
$34.00 $68.00