Provide PDF Format
AASHTO T 313-12 (R2016)
- Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
- standard by American Association of State and Highway Transportation Officials, 2012
- Publisher: AASHTO
$38.00$76.00
This test method covers the determination of the flexural creep stiffness or compliance of asphalt binders by means of a bending beam rheometer. It is applicable to material having a flexural stiffness value from 20 MPa to 1 GPa (creep compliance values in the range of 50 nPa-1 to 1 nPa-1) and can be used with unaged material or with material aged using T240 (RTFOT) or R 28 (PAV), or both. The test apparatus is designed for testing within the temperature range from -36 to 0° C.
Test results are not valid for beams of asphalt binder that deflect more than 4mm, or less than 0.08 mm, when tested in accorance with this method.
Test results are not valid for beams of asphalt binder that deflect more than 4mm, or less than 0.08 mm, when tested in accorance with this method.
Related Products
AASHTO T 176-08 (2013)
Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivale..
$34.00 $68.00
AASHTO T 313-10
Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Ben..
$28.00 $55.00
AASHTO PP 73-13 (2015)
Standard Practice for Quality Assurance, Job Site Quality Control, and Reapplication of Protective S..
$34.00 $68.00