Provide PDF Format
AASHTO T 243M/T 243-06
- Standard Method of Test for Sampling Procedure for Impact Testing of Structural Steel
- standard by American Association of State and Highway Transportation Officials,
- Publisher: AASHTO
$60.00$120.00
AASHTO T 243M/T 243-06 is identical to ASTM A673/A673M-05 except provisions specified in this document.
This specification establishes the procedure for longitudinal Charpy V-notch testing of structural steel and contains two frequencies of testing. The impact properties of steel can vary within the same heat and piece, be it as rolled, control rolled or heat treated. The purchaser should, therefore, be aware that testing of one plate, bar, or shape does not provide assurance that all plates, bars, or shapes of the same heat as processed will be identical in toughness with the product tested. Normalizing or quenching and tempering the product will reduce the degree of variation. This specification is intended to supplement specifications for structural steel when so specified. This specification does not necessarily apply to all product specifications; therefore, the manufacturer or processor should be consulted for energy absorption levels and minimum testing temperatures that can be expected or supplied.
This specification establishes the procedure for longitudinal Charpy V-notch testing of structural steel and contains two frequencies of testing. The impact properties of steel can vary within the same heat and piece, be it as rolled, control rolled or heat treated. The purchaser should, therefore, be aware that testing of one plate, bar, or shape does not provide assurance that all plates, bars, or shapes of the same heat as processed will be identical in toughness with the product tested. Normalizing or quenching and tempering the product will reduce the degree of variation. This specification is intended to supplement specifications for structural steel when so specified. This specification does not necessarily apply to all product specifications; therefore, the manufacturer or processor should be consulted for energy absorption levels and minimum testing temperatures that can be expected or supplied.
Related Products
AASHTO TP 81-12 (2016)
Standard Method of Test for Determining Aggregate Shape Properties by Means of Digital Image Analysi..
$34.00 $68.00
AASHTO T 107M/T 107-11 (2015)
Standard Method of Test for Autoclave Expansion of Portland Cement [ASTM Designation: C 151/C 151M-0..
$19.00 $37.00
AASHTO T 23-13
Standard Method of Test for Making and Curing Concrete Test Specimens in the Field (ASTM Designtion:..
$25.00 $50.00