Provide PDF Format
AASHTO T 213M/T 213-11 (2015)
- Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles [ASTM Designation: A 428/A 428M-10]
- standard by American Association of State and Highway Transportation Officials, 2011
- Publisher: AASHTO
$21.00$42.00
This test method covers procedures for determining the mass [weight] of coating on aluminum-coated iron or steel sheets and wire, and on other aluminum-coated iron and steel articles.
For sheet products, the final results are expressed as either coating mass [weight] total both sides, or coating mass [weight] separately on each side, depending on the specified requirements.
Current regulation codes and hazard classifications for chemicals used in this test method are listed in R 16.
This test is identical to ASTM A 428/A 428 M-10 except for inch-pound units, rather than SI units, shown in brackets; the addition of Section 1.5; and the additional requirement at the end of Section 8.1.
For sheet products, the final results are expressed as either coating mass [weight] total both sides, or coating mass [weight] separately on each side, depending on the specified requirements.
Current regulation codes and hazard classifications for chemicals used in this test method are listed in R 16.
This test is identical to ASTM A 428/A 428 M-10 except for inch-pound units, rather than SI units, shown in brackets; the addition of Section 1.5; and the additional requirement at the end of Section 8.1.
Related Products
AASHTO R 18-10 (2015)
Standard Recommended Practice for Establishing and Implementing a Quality System for Construction Ma..
$38.00 $76.00
AASHTO T 359-16
Standard Method of Test for Pavement Thickness by Magnetic Pulse Induction..
$26.00 $52.00
AASHTO T 317-04 (2013)
Standard Method of Test for Prediction of Asphalt-Bound Pavement Layer Temperatures..
$30.00 $60.00
AASHTO M 152M/M 152-15
Standard Specification for Flow Table for Use in Tests of Hydraulic Cement (ASTM Designation: C 230/..
$21.00 $42.00